Enjuku Racing Parts, LLC

Battle Version Adjustable Rear LCA for Nissan 240sx 89-93

Thu, 02 Jul 2009 11:38:23 -0400

]]>Battle Version Adjustable RLCA for your Nissan 240sx 89-93 (S13). These rear lower control arms are the last piece you will need to dial in your rear suspension and alignment settings for track use.

Recommended for only dedicated race cars for track use.

This set was incorrectly shipped to a customer and returned. They are still brand new, but been on the shelf for a while and need to be cleared out.
]]>

Silicone Coupler - 2.75 - 3.00 inch reducer

Thu, 25 Jun 2009 16:52:48 -0400

]]>High quality silicone couplers. These are capable of withstanding high temperature and high boost conditions wtihout swelling or bursting.

2.75" to 3.00" (I.D.) Silicone Transition / Reducer

Total Length of Coupler = 3"

Color = Black

]]>

Silicone Coupler - 2.50 - 2.75 inch reducer

Thu, 25 Jun 2009 16:51:07 -0400

]]>High quality silicone couplers. These are capable of withstanding high temperature and high boost conditions wtihout swelling or bursting.

2.50" to 2.75" (I.D.) Silicone Transition / Reducer

Total Length of Coupler = 3"

Color = Black

]]>

*ISIS Race Straight Dual Tip Exhaust - Nissan 240sx 89-94

Thu, 18 Jun 2009 10:52:55 -0400

]]>*ISIS Race Straight Dual Tip Exhaust - Nissan 240sx 89-94

ISIS Has just released their newest design in exhausts. This is a Race type Straight pipe exhaust system.

Straight 3" diameter piping splits to dual 3" tips. This exhaust has no resonator or mufflers. It is an awesome sounding straight pipe exhaust.

Shipment is on the way to us. Pre-Order yours now... limited quantities.
]]>

OE Replacement Water Pump - Nissan SR20DET S13

Wed, 17 Jun 2009 17:22:28 -0400

]]>OE Replacement Water Pump - Nissan SR20DET S13

These are OE Replacement Pumps, similar to what you would get if you went to an auto parts store to buy a replacement pump for a car. These are not OEM Nissan. These are OE Replacement.

Includes New gasket. Stock studs need to be reused.

Enjuku Racing is the first to bring OE Replacement JDM Parts to the US.

Fits S13 SR20DET RWD Only
]]>

*ISIS Aluminum Modular BOV Flange - HKS Style BOV's

Thu, 28 May 2009 14:50:34 -0400

]]>ISIS [I-sis] Modular Aluminum HKS Style Blow Off Valve Flange.

This flange is designed in 2 pieces. The bottom portion can be unscrewed, and welded to the pipe. Then the top piece can be threaded on. This makes for ease of welding and also give you the ability to switch between HKS or Greddy Style BOV's without rewelding.
]]>

*ISIS Aluminum Modular BOV Flange - Greddy Style BOV's

Thu, 28 May 2009 14:48:41 -0400

]]>ISIS [I-sis] Modular Aluminum Greddy Style Blow Off Valve Flange.

This flange is designed in 2 pieces. The bottom portion can be unscrewed, and welded to the pipe. Then the top piece can be threaded on. This makes for ease of welding and also give you the ability to switch between HKS or Greddy Style BOV's without rewelding.
]]>

*ISIS Fuel Pressure Regulator Adapter - Nissan SR20DET/KA

Wed, 27 May 2009 14:50:29 -0400

]]>ISIS [I-sis] Fuel Pressure regualtor adapter for your Nissan SR20DET and KA24DE Fuel Rail.

Adapter needed when using any external Fuel Pressure Regualtor such as the Nismo FPR Type B, Aeromotive Universal FPR, ISIS FPR, etc.... Bolts to fuel rail and intermediate hose is run to remote FPR.
]]>

RB26DETT Intake manifold. ITB setup

Wed, 27 May 2009 12:11:34 -0400

]]>USED OEM RB26DETT Intake Manifold.All sensors,No Injectors,Will Not Part out.

contact - Jason777albertson@yahoo.com for info.

You can not purchase this item through this site.This is only an advertisement.

]]>

OEM Replacement - Starter - Nissan SR20DET S13/S14

Mon, 25 May 2009 11:35:15 -0400

]]>OEM Replacement Starter for your Nissan SR20DET RWD S13/S14

Enjuku Racing is the first to bring you an actual replament starter option for your SR20DET. No longer will you need to buy a new one from Nissan Japan for over $500. We have sourced brand new replacement starters for the Japanese engine. This is just like buying a replacement starter from the auto parts store, but specifically for the JDM SR20DET RWD S13/S14 engines.

These are NOT Remanufacturers, theses are brand new OEM replacement starters.
]]>

Cobb AccessPORT 2006-2007 Subaru WRX

Thu, 21 May 2009 11:40:59 -0400

]]>The AccessPORT by COBB Tuning, Inc. is a handheld programmer that allows you to unlock your vehicle's hidden potential by reprogramming the stock Engine Control Unit (ECU).

With a short and guided installation process you can upgrade the ECU in your car from stock to one of our performance oriented tuning maps. The unit uses the OBD-2 diagnostic port, and requires no cutting, wiring, or other such modifications, simply plug-and-play.

Using our off-the-shelf staged maps, the AccessPORT can unlock the potential of your vehicle by as much as 50hp, and more based on further modifications. The possibilities are endless since the AccessPORT is a short ProTUNE away from giving your car even more potential from the staged maps.

The AccessPORT's features include:

» On-the-fly map switching
» Monitor vehicle sensor data and display in analog or digital format
» Vibrant color graphic display with First-Ever full 260,000 color OLED, high-resolution screen
» Read/Clear engine trouble codes
» Preloaded with performance, economy and convenience maps
» Update via the Internet
» Measure 0-60 and ¼ mile times
» Adjustable on-screen Shift Light functionality
» Estimates horsepower and torque
» Displays current and averaged fuel economy
» Drag race simulation with reaction time and time slip data
» Built in on-screen help mode function
» Multi-Language support
» RoHS compliant (Lead Free design)
» Custom performance tuning for your specific vehicle and modifications as provided by an authorized AccessPORT ProTUNER center, or upgrade to the StreetTUNER software package for do-it-yourself tuning
]]>

Cobb AccessPORT 2006-2007 Subaru WRX

Wed, 20 May 2009 12:37:26 -0400

Cobb AccessPORT 2004-2007 Subaru STI

Wed, 20 May 2009 12:35:47 -0400

Cobb AccessPORT 2002-2005 Subaru WRX

Wed, 20 May 2009 12:34:54 -0400

Cobb AccessPORT 2009+ Nissan GTR

Wed, 20 May 2009 12:01:20 -0400

]]>The AccessPORT provides complete control over the factory engine management system. Using the

provided Stage 1 or Stage 2 calibration maps in conjunction with appropriate exhaust modifications, users can see significant

performance gains across the entire power band. The AccessPORT also provides users with many convenience features

such as anti-theft mode, economy mode, and valet mode calibrations along with a fully featured DTC code reader. More

than just a programmer, the AccessPORT is the ultimate all-in-one solution for the GT-R enthusiast.

AccessPORT features:

Reflashes ECU through factory Data Port (OBD)

Ability to uninstall and revert back to original (stock) ECU data

Ability to store multiple maps, allows switching between maps at users convenience

Ability to read DTCs (trouble codes) from the ECU, BCM, Multi-AV, IPDM, Pre-crash

Seat Belt, Meter/M&A, and Adaptive HL computers

Ability to clear DTCs (trouble codes) from all vehicle computers including Bonnet Light

Ability to update reflash maps as improvements become available

Periodic Internet updates providing new features and improved support

Gains: All figured quoted are at the wheels!!!!

Stage 1 is for a stock vehicle or a vehicle with just a cat-back exhaust.
Stage 2 is for a vehicle with high flow cats or cat deletes and cat-back exhaust. Both stages require the use of the stock intake.

Stage 1 - 91 Oct - +55HP and +60TQ

Stage 1 - 93 Oct - +63HP and +70TQ

Stage 1 - 97 Ron - +63HP and +70TQ

Stage 2 - 91 Oct - +65HP and +80TQ

Stage 2 - 93 Oct - +70HP and +90TQ

Stage 2 - 97 Ron - +70HP and +90TQ
]]>

Cobb AccessPORT 03-06 Nissan 350Z

Wed, 20 May 2009 10:36:08 -0400

]]>The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!

However, the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to monitor your Fuel Economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for costly aftermarket gauges. With the added ability to adjust timing and idle, the AccessPORT is truly more than just a programmer, it is the ultimate all-in-one solution for the 350Z enthusiast.
]]>

Stance GR+3Way Coilovers - Hyundai Genesis Coupe

Fri, 15 May 2009 15:15:49 -0400

]]>GR+3 is Stance's top of the line coilover. The GR+3 features 3-way adjustability, enabling the driver to fine tune low-speed and high-speed bump separately from rebound. An external reservoir is connected to the damper using specially designed fittings that allow the line to swivel and disconnect for packaging and servicing convenience. An optional tool is also available to adjust the gas pressure to give the driver the ultimate adjustment control.

REBOUND
Rebound adjustment controls body roll. It is used to add high speed stability and the rate of weight transfer.

HIGH SPEED
High speed compression adjustment is effective in controlling the overall chassis movement and harshness over bumps.

LOW SPEED
Low speed compression controls the roll, pitch and how quickly weight is transferred to each corner. It is effective in adding turn-in response & providing feedback to the driver.

ADDITIONAL FEATURES
15-Way Damping Adjustable
Upper Pillowball Bearing Adjustable Camber Uppermount
Upper Pillowball Bearing Pillowball Uppermount
Spring Cold Wound Linear Spring
Monotube Inverted Monotube Shocks
Boot Dustboot
Collar Aluminum Collars & Upper Mounts
Bracket Height Adjustable Lower Bracket
Bracket Helper Spring
External Reservoir15-Way Low-Speed Bump & 4-Way High-Speed Bump Adjustment
]]>

M&S Type A Front Grill - 2010 Hyundai Genesis Coupe

Fri, 15 May 2009 10:18:07 -0400

]]>Straight from the Korean auto design company, Mechamachine & Style, is the Type-A front grill.

The grill is a direct fit on KDM front bumpers. It will require the KDM bumper top piece to attach to USDM bumpers. The bottom "lip" of the grill goes over the front bumper and cuts off where it meets the front license plate. It will not be fully covered unless running a Korean or Eurpoean sized front plate.

The grill is made out of high strength fiberglass and arrives unpainted.
]]>

Luxon Front Grill - 2010 Hyundai Genesis Coupe

Fri, 15 May 2009 10:15:50 -0400

]]>The Luxon front grill add a unique touch of style to your Genesis Coupe! It's clean and simple design adds to the overall look of your car without sacrifice.

Installation is very simple and the grill is a direct replacement for the stock OEM grill from Hyundai. The grill comes unpainted.
]]>

MXP Downpipe - Hyundai Genesis Coupe 2.0T

Fri, 15 May 2009 10:07:56 -0400

]]>The MXP Downpipe for Hyundai Genesis Coupe 2.0T is currently in a pre-order status.

We are expecting this product to arrive in the USA near the end of June and we will be shipping out our pre-orders roughly one week after.

There are only a very limited number of these arriving in this batch!
]]>

MXP O2 Housing - Hyundai Genesis Coupe 2.0T

Thu, 14 May 2009 17:25:50 -0400

]]>The MXP O2 Housing for Hyundai Genesis Coupe 2.0T is currently in a pre-order status.

We are expecting this product to arrive in the USA near the end of June and we will be shipping out our pre-orders roughly one week after.

There are only a very limited number of these arriving in this batch!
]]>

MXP Test Pipe - Hyundai Genesis Coupe 2.0T

Thu, 14 May 2009 17:24:22 -0400

]]>The MXP Test Pipe for Hyundai Genesis Coupe 2.0T is currently in a pre-order status.

We are expecting this product to arrive in the USA near the end of June and we will be shipping out our pre-orders roughly one week after.

There are only a very limited number of these arriving in this batch!
]]>

MXP Cat-Back Exhaust System - Hyundai Genesis Coupe 2.0T

Thu, 14 May 2009 17:22:32 -0400

]]>The MXP Dual Outlet Cat-Back Exhaust System for the Hyundai Genesis Coupe 2.0T is currently in a pre-order status.

We are expecting this product to arrive in the USA near the end of June and we will be shipping out our pre-orders roughly one week after.

There are only a very limited number of these arriving in this batch!
]]>

Corbeau 3" 5-Point Racing Harness

Thu, 14 May 2009 16:40:15 -0400

]]>Years of research and design have resulted in the development of the Corbeau 3-Inch 5-Point Harness Belt. This is one of the best looking and highest quality competition harness belts available today. The 5-Point Harness Belt features state of the art Cam-Lock quick release technology, coupled with lightweight pull down length adjusters. The Corbeau 3-Inch Harness belt is SFI 16.1 approved.

Available in: Black, Red, Purple, Green, and Silver.
]]>

Corbeau FX1 Pro Seats

Thu, 14 May 2009 16:32:37 -0400

]]>The FX1 Pro racing seat features composite fiberglass technology. The FX1 Pro combines comfort, performance, and safety at an absolutely unbeatable price. Designed with an emphasis on comfort, this seat is one of the most comfortable race seats you will ever sit in. If you enjoy racing and want a practical and affordable shell seat, the FX1 Pro is a hard one to pass on. As a rule of thumb, the FX1 Pro racing seat will fit up to a 36 inch waist, the FX1 will fit up to a 38 inch waist and the FX1 Wide (black only) will fit up to a 42 inch waist. High wear patches are strategically placed to protect your seat from abuse in the high wear areas. The FX1 Pro racing seat is available in cloth fabric with leatherette high wear patches or black microsuede with leather high wear patches.
]]>