Forge Motorsports Inlet Hose for BMW B58 (M140i, M240i, M340i, M440i)
$141.94
(No reviews yet)
Write a Review
Write a Review
Forge Motorsport
Forge Motorsports Inlet Hose for BMW B58 (M140i, M240i, M340i, M440i)
- SKU:
- FMINLH25
We want to be your only stop for quality auto racing parts, and we recognize that our customers may need some assistance in choosing the right products. After all, nobody is born an expert.
As knowledgeable racing enthusiasts, we are happy to offer our professional advice, quotes, and assistance over the phone.
If you need information or advice on the latest Nissan aftermarket parts, or if you have any questions at all, please feel free to give our friendly experts a call at (352) 241-8399 or send us an email at [email protected]
Working Hours:
- Monday 11AM - 5PM EST
- Tuesday - Friday 10AM - 5PM EST
- Closed for lunch daily, 12:30PM - 1:30PM EST
Questions? Contact our experts at (352) 241-8399 or send us an email.
When looking at the B58 engine within the M140i/240i/340i/440i engine bay it€™s clear that BMW had left some room for modification within the inlet tract, the sound resonator and accordion ribs cause significant turbulence to the airflow causing a detriment to the engine€™s potential performance. By removing these, and replacing it with five-ply silicone construction you gain a host of performance upgrades, including:
Significant power gain of over 9bhp engine power and 7nm of torque.
Improved induction noise.
Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose.
5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose.
Fitting with no specialist tools in approximately half an hour.
Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer, This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast.
From the dyno graph shown, performance gains can be expected from 4500RPM to the red line with +9BHP and +7NM of torque at peak RPM. Not only is FMINLH25 a functional improvement, but with it being available in black and red this product really helps to improve the aesthetics of the engine bay.
One major difference of FMINLH25 is the diameter of the hose at the airbox end. Usually this is 85mm diameter, however FMINLH25 is 90mm diameter, and uses a silicone reducer sleeve so that it fits the OEM airbox correctly. This increase of 5mm diameter allows the inlet hose to be used with a wider variety of airbox/intake systems while also increasing the volume and de-restricting the flow of the OEM part,
Â
Â
This product is a direct fit for the OEM part 13718601682 (just the turbo inlet to airbox section).
The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically.
Lifetime warranty.
Why not pair this with our Forge Motorsport replacement high flow panel filter (FMPAN-0172) if you are using the OEM airbox.
Complimentary Products
Panel Filter
Chargecooler Radiator
Boost Pipes
Fitment:
BMW 1 Series F20/F21/F40 3/5 Dr Hatchback 2012 Onwards M140i 2016 Onwards (B58)
BMW 2 Series F22/F23 2Dr Coupe/Convertible 2014 Onwards M240 2016 Onwards (B58)
BMW 3 Series G20/G21 Saloon/Estate 2020- M340i 2020- (B58)
Significant power gain of over 9bhp engine power and 7nm of torque.
Improved induction noise.
Multi ply silicone construction improves longevity of FMINLH25 over that of the OEM hose.
5 ply silicone construction will be able to handle strain of engine mapping far better than OEM hose.
Fitting with no specialist tools in approximately half an hour.
Testing was completed using Performance Remap in Gloucester with their VTEC 4 wheel drive dynamometer, This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. The results below speak for themselves, also with the added benefit of being a very easy component to fit with no specialist tools this is superb, affordable modification for the BMW enthusiast.
From the dyno graph shown, performance gains can be expected from 4500RPM to the red line with +9BHP and +7NM of torque at peak RPM. Not only is FMINLH25 a functional improvement, but with it being available in black and red this product really helps to improve the aesthetics of the engine bay.
One major difference of FMINLH25 is the diameter of the hose at the airbox end. Usually this is 85mm diameter, however FMINLH25 is 90mm diameter, and uses a silicone reducer sleeve so that it fits the OEM airbox correctly. This increase of 5mm diameter allows the inlet hose to be used with a wider variety of airbox/intake systems while also increasing the volume and de-restricting the flow of the OEM part,
Â
Â
This product is a direct fit for the OEM part 13718601682 (just the turbo inlet to airbox section).
The hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
The construction of the hoses has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically.
Lifetime warranty.
Why not pair this with our Forge Motorsport replacement high flow panel filter (FMPAN-0172) if you are using the OEM airbox.
Complimentary Products
Panel Filter
Chargecooler Radiator
Boost Pipes
Fitment:
BMW 1 Series F20/F21/F40 3/5 Dr Hatchback 2012 Onwards M140i 2016 Onwards (B58)
BMW 2 Series F22/F23 2Dr Coupe/Convertible 2014 Onwards M240 2016 Onwards (B58)
BMW 3 Series G20/G21 Saloon/Estate 2020- M340i 2020- (B58)
- Orders are usually processed within 24 hours. Those placed on weekends and holidays will begin processing at the start of the next business day.
- If you need to receive any part by a certain deadline, or within an urgent timeframe, please call or email us so we can verify the ready availability of the item(s) in question.
- At Enjuku racing, we are pleased to ship orders to any location in the world.
- Most customers within the 48 continental United States receive their orders within 7-10 business days.
- We ship most orders via FedEx Ground. All orders outside the continental United States are subject to higher shipping costs.
Related Products
-
-
-
-
vrsf10583010 VRSF B48 B46 B58 Front Mount Intercooler Upgrade for 2016+ BMW M140i/M240i/340i/440i & xDrive
$499.99$419.99
Forge Motorsports Inlet Hose for BMW B58 (M140i, M240i, M340i, M440i)
$141.94