Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Clear
$309.74
$294.99
(You save
$14.75
)
(No reviews yet)
Write a Review
Write a Review
Skunk2
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Clear
- SKU:
- skk542-05-2105
We want to be your only stop for quality auto racing parts, and we recognize that our customers may need some assistance in choosing the right products. After all, nobody is born an expert.
As knowledgeable racing enthusiasts, we are happy to offer our professional advice, quotes, and assistance over the phone.
If you need information or advice on the latest Nissan aftermarket parts, or if you have any questions at all, please feel free to give our friendly experts a call at (352) 241-8399 or send us an email at [email protected]
Working Hours:
- Monday 11AM - 5PM EST
- Tuesday - Friday 10AM - 5PM EST
- Closed for lunch daily, 12:30PM - 1:30PM EST
Questions? Contact our experts at (352) 241-8399 or send us an email.
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set – Clear
Skunk2 has done it again! While others are busy imitating our Pro Series LCA’s, Skunk2 engineers have put 100's of hours of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of the Ultra Series Rear Lower Control Arms... themost complete solution for the ’89-’95 Civic/ CRX and ’90-’01 Integra.
The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of “Me Too” Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA’s. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA’s.
Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions.
FEATURES:
CNC Machined from Forged 7075 Aluminum
44% Lighter than OEM Arms
19% Lighter than Original Skunk2 Pro Series Arms
27% Stronger than Original Skunk2 Pro Series Arms
Outboard Spherical Bearing Eliminates Bushing Twist
Tuned Polyurethane Inboard Bushing Dampens NVH
Delrin Shock Mount Bushings for Improved Shock Performance
**Optional Inboard Spherical Bearing Upgrade Available**
For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2’s Rear Lower Control Arms are both. For maximum suspension performance, Skunk2 Rear Lower Control Arms are best complemented with Skunk2 Rear Camber Kits, Lower Arm Bars, and Strut Tower Bars.
Fitment:
1988 - 1995 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)
1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
1988 - 1991 Honda CR-X (1.6L S/Si)
1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Not compatible with '88 model rear shocks. Must use Skunk2 Sport Shocks, Pro-S Coilovers, Pro-C Coilovers or similar.
Skunk2 has done it again! While others are busy imitating our Pro Series LCA’s, Skunk2 engineers have put 100's of hours of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of the Ultra Series Rear Lower Control Arms... themost complete solution for the ’89-’95 Civic/ CRX and ’90-’01 Integra.
The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of “Me Too” Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA’s. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA’s.
Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions.
FEATURES:
CNC Machined from Forged 7075 Aluminum
44% Lighter than OEM Arms
19% Lighter than Original Skunk2 Pro Series Arms
27% Stronger than Original Skunk2 Pro Series Arms
Outboard Spherical Bearing Eliminates Bushing Twist
Tuned Polyurethane Inboard Bushing Dampens NVH
Delrin Shock Mount Bushings for Improved Shock Performance
**Optional Inboard Spherical Bearing Upgrade Available**
For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2’s Rear Lower Control Arms are both. For maximum suspension performance, Skunk2 Rear Lower Control Arms are best complemented with Skunk2 Rear Camber Kits, Lower Arm Bars, and Strut Tower Bars.
Fitment:
1988 - 1995 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)
1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
1988 - 1991 Honda CR-X (1.6L S/Si)
1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Not compatible with '88 model rear shocks. Must use Skunk2 Sport Shocks, Pro-S Coilovers, Pro-C Coilovers or similar.
- Orders are usually processed within 24 hours. Those placed on weekends and holidays will begin processing at the start of the next business day.
- If you need to receive any part by a certain deadline, or within an urgent timeframe, please call or email us so we can verify the ready availability of the item(s) in question.
- At Enjuku racing, we are pleased to ship orders to any location in the world.
- Most customers within the 48 continental United States receive their orders within 7-10 business days.
- We ship most orders via FedEx Ground. All orders outside the continental United States are subject to higher shipping costs.
Related Products
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Clear
$309.74
$294.99
(You save
$14.75
)